How Brushes are made? (I)

The manufacturing process of daily brush is relatively simple for industrial brush. The structure of the brush is divided into implantable, wound type and welded type. Daily brush implantable as a common technology. Although it is just a common brush, the manufacturer can be configured for its birth with a complete set of production equipment: injection molding machine, wire drawing machine, wire planting machine, flowering machine, air hammer, spot welding machine, plastic particles and so on.

1) injection molding machine

The manufacture of plastic broom cannot do without injection molding machine. Injection molding machines, also known as injection molding machines or injection machines, heat the plastic and apply high pressure to the molten plastic to inject it into the mold cavity. Injection molding machine with the thrust of the screw (or plunger), has plasticized good melting state (namely viscous flow state) plastic injection into the closed mold cavity, after curing and shaping products.

2) the wire drawing machine

The wire drawing machine is also known as the wire drawing machine, which can suck out the moisture produced by the plastic in the stirring process and pull out the uniform and smooth plastic wire.

3) the flocking machine

The broomstick with the wire part is a box with holes at the bottom, large steel needle leads a wisp of plastic wire through each hole internal tension, external with a ruler board reserved snare length. After all the wrapping is completed, the inside of the box is coated with glue to fix the plastic wire, and the trap outside the box is cut to make the hair of the broom.

4) flowering machine

The flowering machine is a large equipment that can remove impurities. It can loosen the compressed and entangled fiber raw materials and remove impurities. Release fibers, cotton, textiles and other materials, by tearing the large entangled fibers into small pieces or bundles, at the same time in the process of release with mixing, removing impurities. Used to remove impurities from the brush.

5). Pneumatic hammer

The compressed cylinder compresses the air and sends it to the working cylinder through the distribution valve to push the piston together with the hammer head to move up and down to play the role of hammer. Shape the cleaning brush.

6). Spot welding machine

Handles for welding plastics and cleaning brushes.

Post time: Oct-31-2022